為了讓房子的御寒實際效果得到提高，許多房屋建筑都進行了保溫砂漿安裝操作，其實建筑物的無機保溫砂漿就是將絕熱材料與房屋建筑墻面穩定在一起，以達到隔熱或者隔熱保溫中的一種措施。但是如果施工或者選材時的一些疏忽，非常容易造成隔熱層的鼓包、剝落。造成保溫砂漿總是鼓包剝落是什么原因?下面濟南抹面砂漿廠家為您分析：

In order to improve the actual insulation effect of houses, many buildings have carried out insulation mortar installation operations. In fact, the inorganic insulation mortar of buildings is a measure to stabilize the insulation materials with the building walls to achieve insulation or insulation. However, if there are some negligence in construction or material selection, it is very easy to cause bulging and peeling of the insulation layer. What is the reason for the constant bulging and peeling of insulation mortar? Below, Jinan plastering mortar manufacturer will analyze for you:

先是基層結構因素，排架結構外墻在砼梁柱和砌體接縫處，易出現因砌體變型而導致的隔熱層破壞。腳手架洞口等未砌實，生成隔熱層局部性基層不牢而破壞。墻體裝飾構件穩定不牢、移位，生成推拉作用，使隔熱層局部性鼓包、開裂后長期滲水，造成隔熱層剝落。

Firstly, there are grassroots structural factors. The exterior walls of the bent structure are prone to damage to the insulation layer due to masonry deformation at the joints of concrete beams, columns, and masonry. Scaffold openings and other areas are not solidly built, resulting in local weak insulation layer and damage to the base layer. The unstable and displaced wall decorative components generate a push pull effect, causing local bulging and cracking of the insulation layer and long-term water seepage, resulting in the peeling of the insulation layer.

墻面頁面處理不當，除黏土磚墻內，其他墻面均應用抹面砂漿處理之后再涂抹漿體隔熱材料，不然易造成隔熱層直接鼓包或頁面處理材質無效，生成界面層與主體墻空鼓，連帶生成隔熱層鼓包。外墻保溫板外表也需要使用抹面砂漿處理，不然也會導致隔熱層局部性鼓包。

Improper handling of wall pages, except for clay brick walls, all other walls should be treated with plastering mortar before applying slurry insulation materials. Otherwise, it may cause direct bulging of the insulation layer or ineffective page processing materials, resulting in empty bulging of the interface layer and the main wall, and subsequently generating bulging of the insulation layer. The exterior of the external wall insulation board also needs to be treated with plastering mortar, otherwise it may cause local bulging of the insulation layer.

另外是由于抗壓措施不當，保溫砂漿廠家介紹如果外墻保溫板外表負荷過大，或對負風壓抵抗措施采取不合理，如沿海或高層住宅外墻面采取非釘粘結合的粘接方式，易使隔熱保溫板塊被風壓破壞而鼓包剝落。

In addition, due to improper compression measures, the insulation mortar manufacturer introduced that if the external load of the external wall insulation board is too large, or if negative wind pressure resistance measures are taken unreasonably, such as using non nail bonding bonding on the outer wall of coastal or high-rise residential buildings, it is easy to cause the insulation board to be damaged by wind pressure and bulge and peel off.

保溫砂漿空鼓脫落的原因一般是以上所講內容造成的，您在使用前后要多加注意，仔細做好相關準備工作再去使用可有效減少的問題出現，更多事項就來我們網站http://www.netjobs.cc咨詢！

The reason for the hollow and peeling of insulation mortar is generally caused by the above content. You should pay more attention before and after use, carefully prepare for relevant work, and then use it to effectively reduce the occurrence of problems. For more information, please come to our website http://www.netjobs.cc consulting service