Commonly used putty powder equipment is usually divided into three types: horizontal putty powder equipment, complete putty powder equipment and vertical putty powder equipment.

　　立式膩子粉設備，采用圓筒立式形式，中間穿插螺桿，軸承在圓筒下部，連接有固定攪拌電機，裝有裝料升降機。該材料采用攪拌和拋擲中間材料的形式，達到均勻的混合效果。

　　Vertical putty powder equipment adopts cylinder vertical form, with screw inserted in the middle, bearing in the lower part of the cylinder, connected with a fixed stirring motor, equipped with a loading elevator. The material is in the form of stirring and throwing intermediate materials to achieve a uniform mixing effect.

　　臥式膩子粉料設備，以筒體敷設形式，中間穿插2 -3層螺旋皮帶，筒體兩端軸承，通過減速器連接到攪拌電機上，同時裝有上料升降機。材料通過多層螺旋帶攪拌的形式均勻混合。

　　Horizontal putty powder equipment, in the form of cylinder laying, inserts 2-3 layer spiral belt in the middle, bearings at both ends of the cylinder, connects to the mixing motor through reducer, and equips with feeding elevator. Material is evenly mixed in the form of multi-layer spiral belt stirring.

　　膩子粉成套設備是由攪拌機系統、除塵系統、包裝系統、提升系統等組成的一套先進的膩子粉生產設備。

　　Putty powder complete set of equipment is an advanced putty powder production equipment composed of mixer system, dust removal system, packaging system, lifting system, etc.

　　之間的區別:

　　Differences between:

　　立式膩子粉設備:

　　Vertical putty powder equipment:

　　1. 成本低，適合小投資和個人用戶。每批攪拌1000公斤的型號出廠價在3000元左右。

　　1. Low cost, suitable for small investment and individual users. The ex-factory price of 1000 kg mixer per batch is about 3000 yuan.

　　2. 攪拌速度緩慢。由于物料的局部移動，攪拌速度慢導致成品率低。

　　2. Stirring speed is slow. Due to the local movement of materials, the slow mixing speed leads to low yield.

　　3.混合均勻度低。有些材料以上拋混合的形式使用。

　　3. Low mixing uniformity. Some materials are used in the form of mixing above.

　　4. 維修率高，軸承在攪拌機下方，物料容易進入軸承，導致軸承抱死斷裂。平均每3個月左右就要更換一次軸承。

　　4. Maintenance rate is high. Bearing is under the mixer. Material easily enters the bearing, which leads to the bearing locking fracture. On average, bearings need to be replaced every three months or so.

　　臥式膩子粉設備:

　　Horizontal putty powder equipment:

　　1. 成本略高，適合中小型投資。對于個人用戶和企業用戶，每批次1000kg攪拌的機型出廠價格約為14000。

　　1. The cost is slightly higher and suitable for small and medium-sized investment. For individual and enterprise users, the ex-factory price of 1000kg mixer per batch is about 14000.

　　2. 攪拌速度快，采用多層螺旋帶攪拌，整個物料運動，速度快，產量高，平均攪拌時間在5-10分鐘。

　　2. The agitation speed is fast, the whole material moves with multi-layer spiral belt agitation, the speed is fast, the output is high, the average agitation time is 5-10 minutes.

　　3.攪拌均勻性高，物料無運動，多層螺旋帶，攪拌無死角，均勻性高，質量好。

　　3. High homogeneity of mixing, no movement of materials, multi-layer spiral belt, no dead angle of mixing, high homogeneity and good quality.

　　4. 維修率低，軸承位于攪拌機兩端，物料不易進入，配有減速機，維修率低。

　　4. Low maintenance rate, bearing at both ends of mixer, material is not easy to enter, equipped with reducer, low maintenance rate.

　　5 .一機多用，可生產膩子粉、保溫砂漿、砂漿，也可用于飼料攪拌及醫藥等行業。

　　5. It can be used in many fields, such as putty powder, thermal insulation mortar, king mortar, feed mixing and medicine.

　　以上是濟南膩子粉設備相關信息，更多內容可點擊官網咨詢:http://www.netjobs.cc/

　　The above information is about putty powder equipment in Jinan. For more information, please click on the official website: http://www.netjobs.cc./